The purpose of this assignment is to allow you to apply the principles you have learned in this module to a practical fluids system. You are asked to identify a real fluids system that employs a pump. For this system you are required to:•    explain the function of the system and how it operates. •    identify the type and power of the pump•    describe how the pump works and explain why the type of pump used has been selected for this ...

Get Answer

Customer's Feedback

Best work ever i ordered 3 similar assignment and his the only one that he did it 90% correct .

With solar photovoltaic panels an electric current is created directly from sunlight. If the solar panel is aligned directly perpendicular to the incident light considerably improved efficiencies can be achieved. The trouble is the sun (or rather the earth moves) meaning to point the panel at the sun it must be periodically moved. If the panel is mounted on a motor and gearbox the panel can be electrically steered towards the sun by driving the motor in the forward or reverse directions until al...

Question 1: Describe the function of the component, clearly identifying the material-based attributes that are important to its function (i.e. transparency if it is a window).I choose the bicycle fork. Question 2: What are the material property constraints and objectives that would be required (you may use assumptions for the exact values of these properties)? Question 3: Consider these attributes, constraints and objectives in undertaking a basic material selection using level 2 of th...

Title: the circular economyYou are the sustainability manager for a manufacturer of robotic lawn mowers for home and small business users. At present, your material and energy flows are entirely linear (no reuse or recycling). Your CEO has seen a presentation on ‘The Circular Economy’ and has asked you to investigate the extent to which this concept could be applied to the company and its products. You are primarily responsible for the sustainability of the manufacturing activities o...

TASK 1: LO3.1 a)    Using Manufacturer’s datasheets complete a table using Nominal values for the following logic families: LS TTL, ALS TTL, CMOS, HCMOS. (Include excerpts from datasheet in appendix)b)    Briefly explain the different types of scales of integration: SSI, MSI, LSI, VLSI. (one sentence each)c)    Briefly explain the different types of programmable devices: PROM, PAL, PLA. (one-two sentances)TASK 2: (LO3.2 & LO3.3)You are to de...

The objectives of the assignment are:4.1 To design passive filters together with high gain amplifier for optical sensing and amplification.4.2 To design a band-pass filter with an adjustable gain amplifier to detect and amplify the peak signal of the blood pulse.4.3 To design high noise immunity voltage comparator with adjustable threshold together with a LED driver with brightness control.4.4 To design a resetable square wave oscillator using 555 timer and a simple volume control circuit to con...