Cisco Network Configuration Exercise

Assign IP addresses and default gateways to each of the Eleven PCs

Please note that the FOUR switches are 2960 (each with 16 FastEthernet ports) and the Router can be any model with a Fast Ethernet or higher interface.  Use the PC-PT for the 11 computers.

Assign ip addresses and default gateways to each of the ELEVEN PCs.  Use the text tool to indicate what ip address you are assigning to each of the eleven PCs.

The marks for points 6 – 10 will be ascertained from the printouts of the config files for the FOUR switches and the Router.

Set the ports on switch A to either ACCESS or TRUNK, as appropriate

Set switches B, C and D to VTP clients, AFTER setting the domain name to

Set the ports on switches B, C, and D to either ACCESS or TRUNK as appropriate, 2 marks each for a total of

Enable inter-vlan communication between VLANs 2 and 3 by creating appropriate Subinterfaces on Router A on the connection to Switch A.

Do screenshots of the following:

Pick any computer on Vlan 2, and do successful pings to the other computers on Vlan 2 and Vlan 3

Pick any computer on Vlan 3, and do successful pings to the other computers on Vlan 3 as well as Vlan 2