Plan, Configure And Test Advanced Server-based Security

Questions: Learning Outcomes:This CA will assess student attainment of the following minimum intended learning outcomes:Module Learning Outcomes Assessed: Data Communications   MLO 1 Describe network concepts and terminology demonstrating the need for network protocols.MLO 4 Select and configure appropriate devices to build a local area network to satisfy client and system requirements.MLO 5 Capture and analyse network traffic using appropr...

From the VMware WS 15 main menu select File – New Virtual Machine – Typical. Select Installer disc image file (iso) and click on Browse to locate and select the Fedora 24 Live-x86 ISO you downloaded earlier. Click Next. Specify a VM name (e.g. Fedora 24 server) and click Next. Specify a maximum disk size of 10GB and click Next. Click Finish to create the VM and then follow the steps in lab 1 (first half of the course) to install the F...

Question: Title: Basic Network and Firewall Connectivity & Initial Testing Exercise Description: This exercise consists of building a virtual small-business network to support Beta Corp.’s international operations. Their network consists of an 1) administrative client, 2) a corporate client, 3) a pfSense firewall, and 4) a server. The “server” required for this exercise is simply an Ubuntu desktop VM for simplicity&rsqu...

Questions: Project 1: Cisco Enterprise Switching and Routing  1. Why do you need to configure 0.0.0.1 for R1 and 0.0.0.2 for R2 when setting the router ids for OSPF? 2. What happens if you include the R2 Lo0 network in the OSPF process? 3. What is the purpose of using NAT on R1 instead of R2? 4. Why is TFTP used to backup and restore configurations as opposed to FTP or SSH? 5. Why is it a good idea to backup the running configuration...

Introduction In this task you will create a Certification Authority (CA) which will act as a subordinate Enterprise Certification Authority to issue certificates to users and computers for an organisation called Hexad0m. An offline root Certification Authority is expected to be installed and configured to establish the fundamentals in the PKI architecture to serve as an issuer to your subordinate CA. You will also demonstrate a comprehensive thr...

Present   and   defend   work   using   appropriate   communication   tools   and techniques. Work professionally in a team, recognising strengths and weaknesses of team members to avoid conflict.Analyse    the    relationships    between    business    requirements,    sec...

Introduction In this task you will create a Certification Authority (CA) which will act as a subordinate Enterprise Certification Authority to issue certificates to users and computers for an organisation called Hexad0m. An offline root Certification Authority is expected to be installed and configured to establish the fundamentals in the PKI architecture to serve as an issuer to your subordinate CA. You will also demonstrate a comprehensive thre...

Question: CCNAv7 SRWE Practical Assessment Objectives Part I: Configure Network Infrastructure Settings (VLANs, Trunking, Etherchannel) Part II: Configure DHCP and Switchport Security Part III: Test and Verify IPv4 and IPv6 End-to-End Connectivity Scenario In this Skills Assessment (SA) you will configure the devices in a small network. You must configure a router, switch and PCs to support both IPv4 and IPv6 connectivity for support...

Questions: This is an independent assignment. Each student is responsible to maintain the integrity of their own work. Sharing/Copying/Crowdsourcing will result with academic penalties. Each student is required to upload to eCoenstoga:1.A Word document outline their response to the instructions   BACKGROUND AND SCENARIO:In Week #10 we have been introduced to the CMS Implementation and all the different parts to it.  As we can see there is m...

Course Code   :  CIS527

Referencing Styles  :  APA

4/5 

Question: This is a two (2) part assignment.  In part 1, you will complete a Cisco lab.  In part 2, you will create your own Packet Tracer file to practice for the project.  General Instructions: Unzip the file PacketTracerAndLabs.zip under "IT Infrastructure Project Assignments".   In the zip file PacketTracerAndLabs.zip, install Packet Tracer using the .exe file “Cisco Packet Tracer 6.2 for Windows Student Vers...

Task 1 – In-class test Task 1 is weighted at 30% of the overall portfolio mark, but it is assessed and marked separately. This is a Canvas based test that contains different types of questions (multiple choice, true/ false, etc) and is worth a total of 30 points. There are different question types, but these have been designed in order to bear the same weight for your assessment. The questions on the test will only reflect and test the l...

Task: OverviewTest 3 requires you to create a simple network topology and configure packet filtering firewalls using packet tracer. You will not use any reference material. During the quiz Packet tracer must be the only application open on your desktop at any time. If you are found with any other application open it will be treated as an academic offence and you will be assessed a grade of 0 on the quiz. Once you have completed the quiz you wi...

Course Code   :  CS155

Referencing Styles  :  IEEE

4/5 

Question: Scenario  This culminating activity includes many of the skills that you have acquired during this course. You will secure routers using the CLI to configure various IOS features, including AAA, SSH, and Zone-Based Policy Firewall (ZPF). You will configure a site-to-site VPN between R1 and R3 (you only required to configure R1). You will secure the switches on the network.  Requirements  Note: Not all security featu...

Course Code   :  DCOM 3100

Referencing Styles  :  Not Selected

4/5 

Objectives In this Capstone Project activity, you will demonstrate your ability to: Design and implement an IPv4 VLSM addressing scheme that fulfills the requirements Design and implement an IPv6 VLSM addressing scheme that fulfills the requirements Design, configure, verify, and secure EIGRP for the necessary networks Design, configure and verify Link Aggregation, RapidPVST+, FHRP, Port Fast, Edge Ports Create detailed design documentati...

Course Code   :  CNT 6519

Referencing Styles  :  APA

4/5 

Virtual Machine Setup and Networking between VMs: Please install VirtualBox on your own machine, then import the following two VM images in your VirtualBox:  Kali Linux VM, and Windows 7 VM (with any version of IE you want). 1).  Set up these two VMs in “Nat Network” mode and put them in one virtual LAN that has the subnet (i.e., network CIDR) of 192.168.100/24.  After that, please find out what are these two VMs IP a...

Part 1: Using Wireshark for network traffic analysis Wireshark is a free and open source packet analyzer. It is used for network troubleshooting, analysis, software and communications protocol development, and education. Wireshark runs on Linux, macOS, BSD, Solaris, some other Unix-like operating systems, and Microsoft Windows. There is also a terminal-based (non-GUI) version called TShark. Wireshark, and the other programs distributed with it su...

Breeze-Yob, a manufacturer of fine hand creams originally started in Sweden in 1966, requires a  network for their new un-networked building. The offices are located in one building; 4 stories of  approx 12 ft high each – W x D of approx 200 x 160 ft. (see diagrams on BB). The owner of the company, Mr. Lou Scannon, requires recommendations, with pricing, for the following services for the  new network. Prices (ballpark &ndash...

Question: Security models ABC Ltd. is a company providing security solutions to public services. You are asked to help the ABC Ltd to design a security model for the national defence department - a part of an e-government project on secure information control in managing troops. Assume the armed forces be classified as: {army, navy, air force, marines}, the security levels are typed as: {high, low}. Your tasks: You should produce a short rep...

Task Explain the concepts and procedures associated with Web and database attacks by addressing the following: Explain when and why the initial penetration test should be performed on a Web server. Explain the similarities and differences between a cross-site scripting attack and a reflective cross-site scripting attack. Identify the Web application attacks that are most likely to compromise confidentiality. Describe techniques to mitigate and r...

Question: Module Learning Outcomes Assessed: Critically evaluate the role of a security policy for protecting information assets and be able to propose appropriate security policies to defend those assets based on an understanding of security concepts and their application to internet-based technologies. Demonstrate a sound understanding of the key legislation that relates to information security and how it influences the security policy o...

Referencing Styles  :  Not Selected

4/5 

Question: (A) Choose an existing database design, review it, and adapt it for your assignment (B) Identify a report (standard query) that can be run against your database design (C) Plan how to test your report and identify the necessary test data (D) Create a corresponding relational scheme, and verify it meets first, second and third normal forms (E) Implement your database scheme using MariaDB and load the test data (F) Then write, run...

Course Code   :  QAC020N253A

Referencing Styles  :  Harvard

4/5 

Question: Module Learning Outcomes Students who successfully complete this module will be able to: 1.Identify, analyse and communicate principles and processes of Network Design. 2.Critically analyse and evaluate business and technical Requirements. 3.Plan and design a Network Infrastructure (LAN/WAN/MAN). 4.Design and evaluate a management and implementation Strategy for a Network. 5.Collect and synthesise information to inform a choice ...

Outcomes addressed in this activity: Describe common port scanning tools and techniques. Explain the enumeration step of security testing. Use scanning and enumeration to identify potential vulnerabilities for exploitation. Use appropriate tools to capture network traffic in order to perform a threat analysis. Course Outcome: Perform vulnerability tests using computer and network tools and utilities. Purpose The purpose of this lab ...

Task: Assignment 1: The assignment will entail reading a range of academic papers, journals and books. You will be writing reports and designing Distributed Database Systems and Data Warehouse Systems. Tasks Task 1: Distributed Database Design Happy Cruise Lines is a cruise company with several ships and a variety of cruise itineraries, each involving several ports of call. The company headquarters is in New York and has regional offices in ...

Questions: Project 3: A Simple HTTP Client and a Simple HTTP Server    The project requires you to learn a non-trivial, existing network protocol, HTTP, and to thoroughly understand it, at least in the parts that are required by this project. Therefore, you will need to make a lot of efforts to conduct an independent research and self-learning before you can even start to write a single line of code.    Once you understan...