Main heading that includes your primary keyword

The assignment should be your own work and written in your own words (1500 words + relevant material in Appendices). It will be checked for plagiarism using Turnitin. Any plagiarism or copying from others will be dealt with through the university’s plagiarism procedures.

Your assignment must be submitted electronically via BlackBoard (Assignments tab) by the submission time. The report should be contained in a Word document, or PDF. No other means of submission will be accepted. The software code will be submitted independently. Any assignment submitted late but within 5 working days of the deadline will be given a maximum mark of 50%. Assignments submitted more than 5 working days after the deadline will not be marked, and a mark of 0% will be recorded.

Learning Outcome to be assessed:

1 Demonstrate knowledge and critical understanding of sensors and transducers typically encountered in engineering applications

2 Understand critically the practical aspects of sensor use and type

3 Demonstrate knowledge and critical understanding of the principles of instrumentation and measurement systems

4 Demonstrate knowledge and critical understanding in the devise of an appropriate and effective strategy for processing data; virtual instrumentation and virtual simulation

Provide a detailed, professional report for your director that contains the following:

1- A review of different SCS and sub-systems used currently in campuses including their main elements.

2- A design of a typical SCS system that incorporates at least two sub-systems. The system design should include DAQ/ microcontroller and any other required elements for SCS operation.

3- An evaluation of signal conditioning elements that are used in your SCS.

4- Proposal for the next phases of development to include the following:

A. Using of a low-cost controller instead of the current one

B. Using industrial networks of data transmissions; wireless or wired datatransmission and Internet of Things

1 A review of different SCS and sub-systems used currently in campuses including their main elements

2 A design of a typical SCS system that incorporates at least two subsystems. The system design should include DAQ/ microcontroller and any other required elements for SCS operation.

3 An evaluation of signal conditioning elements that are used in your SCS.

4 (A) Proposal for the next phases of development to include the use of a low-cost controller instead of the current one.

4 (B) Proposal for the next phases of development to include the use of industrial networks of data transmissions; wireless or wired data transmission and Internet of Things.

5 Report presentation, structure, clarify of information, use of references