Engineering Design And Manufacture : q - engineering+design+and+manufacture

On successful completion of the module, students will be able to:1.    Apply and analyse scenarios in foundation theory in project scenarios.2.    Critically appraise the role of slope stabilisation and assessment, including the contribution of water and seepage, in embankment design.3.    Critically evaluate the collection and appraisal of data related to PAS 128 (utility investigation). COURSEWORKYou are require...

I have a project and I want you to do just a small part of it, which is to determine the truss member sizes required to resist the tensile and compressive forces acting on the truss members. And all the information that is needed is attached. This video link explains all the project but I don't want you to do all the project just calculate the truss member sizes. The design should be presented in an engineering report that clearly shows the analy...

Course Code   :  BuSI 2013

Referencing Styles  :  APA

4/5 

For the linear program SELF test Max 2A + 3B s.t.1A+2B 6 5A + 3B  15 A, B  0 Find the optimal solution using the graphical solution procedure. What is the value of the objective function at the optimal solution?    Question 13:Consider the following linear program: Max 1A + 2B s.t. 1A  5 1B   5 2A + 2B =12 A, B  ≤ 0a. Show the feasible region b. what are the extreme points of the...

Referencing Styles  :  Not Selected

4/5 

Question: Carefully read the following instructions and guidance. They are designed to assist you in providing in providing a portfolio of evidence that best demonstrates the comprehension and application of your engineering knowledge to Washington Accord equivalence. Section One – Instructions and Guidance Familiarise yourself with the definition of ‘complex engineering problems’ (Appendix One) as you are required to dem...

Course Code   :  6003ENG

Referencing Styles  :  Harvard

4/5 

Assignment A local client has recently purchased a vacant lot in Surfers Paradise, Gold Coast. Due to the proximity of the site to local retail shopping outlets, great beaches, tourist destinations and public transport, the client and has expressed interest in developing the site for the construction of a hotel. Zoning requirements of the lot limit the building height to 120 m The client has completed the initial feasibility phase of the projec...

BUAD 283: Excel Solver Assignment In this assignment, you are asked to solve three optimization problems using Excel Solver. To get started, open a new Excel workbook and prepare three worksheets, naming the tabs Question 1, Question 2, Question 3. Question 1: Blizzard Robots Blizzard Robots Inc. has a production issue. Fortunately, with high demand for their products, they can sell whatever they manufacture. Still, they want to make the best use...

Quesitons: Individual-written essay (online assessment) of a strategic change plan  For an organisation of your choice, you should formulate a strategic change plan either for the operations of an existing international business or for organisation intending to internationalise. The strategic change plan should be based on a detailed strategic audit and evaluation of strategic option(s). Strong rationale should be provided for the chosen st...

Course Code   :  DBAS3019

Referencing Styles  :  APA

4/5 

Task The Case You have been supplied with Clearwater.sql, which contains a database creation and population script to create and populate the Clearwater Traders database. You must design business data models that will provide necessary information to data developers for creation of a first normal form staging area that contains all of the measurables (facts) and dimensions (characteristics) necessary for supply of evidence to justify the deci...

Course Code   :  EN8911

Referencing Styles  :  APA

4/5 

Questions: Two weeks before the project presentation (VIVA) (see table 2) the students must submit their project Thesis onto Moodle.The thesis must be complete in itself and must cover all work undertaken under the project, even if it has been previously described in weekly reflections. It should also identify the consequences of delivering this project with respect to the Engineering environment in Bahrain, explain how your research project can...

Critical Dates: Project Assigned: Week #6 Class Working Time: N/A (online delivery) Project Due: Week #9 (Intersession) 2. Project Overview: (description of this project) The objective of this mini project is to create a custom housing for a TV Remote in the SolidWorks environment. The student will design a custom housing including button cut-outs, screw bosses, ribs and fasteners. 3. Project Learning Outcomes: (what the student will complete i...

Questions: Assessment Type: Report This is your assignment for this module. It is worth 20% of your overall grade for this module.  This is an INDIVIDUAL piece of work contributing towards the module assessment.  Evidence of plagiarism or collusion will be taken seriously, and University regulations followed. You are advised to be familiar with the University definitions of plagiarism and collusion.Please ensure to use Turnitin to c...

Question: Reverse Engineering Project   This project is designed to help the student better understand the process of Reverse Engineering, along with the Engineering Design Process and fundamental competency in Inventor.    The project includes 3 sections: 1.Informal Technical Report 2.Drafting in Inventor 3.Presentation/Submission Informal Technical Report 1.Complete an Infomal Technical Report - Create the report in a W...

Course Code   :  EG7037

Referencing Styles  :  Harvard

4/5 

Questions: This piece of coursework covers 100% of the marks for the entire EG7037 Environmental Sustainable Engineering & Logistic module. The word count for this assignment is in the region of 3000 words in addition to Appendices and labelled diagrams / sketches.Presentation: The quality of the presentation, cross-referencing of materials/images & references cited will be awarded 5 Marks   Task 1 – Environmental Sustainabl...

Task to complete: 1. Perform normalisation to 3NF for the data depicted in the sample documents. Note that only one normalisation is required for the function room evaluation, you have been provided with two samples so you can appreciate some of the variety which occurs. The approach you are required to use is the same approach as shown in the normalisation lab solution (see QB and QC). The normalisation must begin by you representing each of th...

Question: Department of Chemical and Process Engineering Introduction Process design entails making trade-offs between competing factors and working within constraints that go beyond purely technical considerations.  This is particularly true during the conceptual design stage of large projects when process engineering decisions must be made that balance economic, safety, environmental and political factors.  Process design encompa...

Course Code   :  DCOM 3100

Referencing Styles  :  Not Selected

4/5 

Objectives In this Capstone Project activity, you will demonstrate your ability to: Design and implement an IPv4 VLSM addressing scheme that fulfills the requirements Design and implement an IPv6 VLSM addressing scheme that fulfills the requirements Design, configure, verify, and secure EIGRP for the necessary networks Design, configure and verify Link Aggregation, RapidPVST+, FHRP, Port Fast, Edge Ports Create detailed design documentati...

Question: The module will integrate knowledge already gained from other modules. The aim is to allow you to work as part of a team, both individually and collectively, to carry out the design of a civil engineering structure. The types of structures could include bridges, retaining structures and tunnelling set within the context of a larger project. Design work will include calculations and drawings in sufficient detail to allow a tender to be ...

Task: We have compiled some excellent articles, white papers, and videos to support learning and exploration. Remember, these are only suggestions to help build upon what you learn. You should not feel restricted in reading what we recommend! If you'd like, prepare your own list in line with what you have learned this week.White papers*:Information Warfare in 2021—Are You Protected from Cyber Attacks? (Links to an external site.)Revolution in ...

Course Code   :  FPL4028N

Referencing Styles  :  Harvard

4/5 

Answer: Introduction Functional beverages are nonalcoholic drink containing nontraditional ingredients like minerals, vitamins, amino acids, dietary fibers (DFs), probiotics, or added raw fruits (Raman, Ambalam & Doble 2019). In the wake of healthy eating and dieting, functional drinks have been brought into focus. Drinks that can positively impact health are preferred by the public. This can be seen to be attributed to the incidence...

Question: As in the real world you will be dealing with ambiguous and uncertain situations and information. You will need to manage, mitigate and justify any assumptions according to your best professional understanding.  You must deliver to your client a professional report that addresses their concerns and puts forward your suggested outline design / action plan with ways to implement that plan.  It is important to remember that you are ac...

Answer: Introduction Globalisation can be referred to the growing interdependence of the worldwide cultures, economy and population that has accelerated the cross-border trades and the flow of investments. Oramah and Dzene (2019) noticed that globalisation is the process of international integration of technology, goods, capital and labour. This report will focus on a comprehensive analysis of globalisation by illustrating a poster presentati...

Referencing Styles  :  Vancouver

4/5 

Part 1: Planning the Assignment Step One: Begin by considering what you wish to get out of this assignment. Each student is different, and there’s room with this assignment for you to make it useful for you, at the same time as fulfilling the course work requirements. Here are some questions and ideas to help you formulate your goals and purpose of this assignment: Or, on the other hand, are you new to the OH&S field, and wish to ask so...

Course Code   :  CS521

Referencing Styles  :  IEEE

4/5 

Question: Project Assignment This is a Project Assignment, in this assignment you should want to do in python code to visulize. the code must be compiled and executed in Spyder programing tool version 5.0.5 ,that tool should be installed by using Anaconda navigator . and in this assignment we will use VTK TOOL. after install Anaconda navigator then open Anaconda navigator command prompt and setup the installation of VTK. in project assignment y...

Course Code   :  M6803

Referencing Styles  :  APA

4/5 

Questions: Write three separate MATLAB programs to approximate the sine curve between 0 and 2π using curve fitting by(a) a polynomial curve of power 4;(b) a cubic spline;(c) Lagrange’s interpolating polynomial or Newton’s interpolating polynomial.You may refer to the textbook (Numerical Methods for Engineers by Chapra and Canale) for the algorithms, but I expect that you can work that out yourself given the lecture materials. &nb...

Task: As part of the formal assessment for the programme you are required to submit a Software Engineering assignment. Please refer to your Student Handbook for full details of the programme assessment scheme and general information on preparing and submitting assignments.Learning Outcomes:After completing the module, you should be able to:1. Identify what a system is and how a systems approach relates to Information Systems.2. Understand the ro...