Well-Explained Civil Engineering Answers Worth Checking Out : Page - 9

Ref style  :  APA

4/5 

The portfolio is to demonstrate the learning outcomes for DCCM600.1. Identify geotechnical factors, substructures and structural systems2. Describe passive fire protection systems3. Critique the building envelope, provisions for services, material selection anddesign4. Explore interior linings, joinery and fitments

Geographic DataAssignment 2: Raster Multicriteria Analysis (UPDATED) Optimal School Location The town is looking to locate a new school to serve its growing population. The mayor has convened three experts to pick the most optimal location: the school board commissioner, the city’s chief planner, and a real estate developer. Each of these stakeholders has different views on the criteria that influence their most optimal site location. In l...

Course Code   :  6003ENG

Course Title   :  integrated design project

Ref style  :  Harvard

4/5 

Hotel Development DetailsA local client has recently purchased a vacant lot in Surfers Paradise, Gold Coast. Due to the proximity of the site to local retail shopping outlets, great beaches, tourist destinations and public transport, the client and has expressed interest in developing the site for the construction of a hotel. Zoning requirements of the lot limit the building height to 120 m The client has completed the initial feasibility pha...

Task The construction of pumping station very close to a river bank requires a long excavation, running parallel with the river, 25m in width and to a depth of 7m (Figure 1) To enable the foundations of the intake works to be constructed in the dry a steel sheet-pile cofferdam is to be constructed between the river and the excavation. The properties of the River bed soil are presented in Table 1. (a) Using Geosolve Wallap and the strength facto...

1) Did your results show a practice variability effect? Explain your answer by comparing your data to the expected effect of practice variability for acquisition, retention and transfer.                       2) Compare and contrast practice variability and contextual interference. That is, in what way(s) are they similar and in what way(s) are they different?      

The Independent Engineering ProjectThe Independent Engineering Project is a major element of accredited engineering or technical degree. It provides the necessary evidence that you are technically competent and capable of entering the world of work as a professional engineer or technologist. The aim is to develop your ability to work independently, in a chosen topic, using relevant technical research and design concepts, and analytical, test,...

Requirements Write a functionto do multi linear regression, [a, r2] = MultiLinearRegress(X, y), that:a.Takes as inputa matrix X where each column X(:,i)contains the data forindependent variable xi and a column vector y containing the data for thedependent variable.b.Checks that size(X,1)is equal to size(y,1)and returns an appropriate errorif this is not the case.c.Performs multiple linear regression by constructing an appropriate coefficientmatri...

Task 1 IntroductionThe Client who is a private investor needs a five storey framed Hotel building(s) to accommodate 200 guests and is proposed together with some inter-connecting Infrastructure with the Motorway which is not only necessary but required as a key element of the project; the building frame provides the structure for a series of high specification living hotel rooms and suites that are intended to be built in the south of England,...

Learning OutcomesThe module will integrate knowledge already gained from other modules. The aim is to allow you to work as part of a team, both individually and collectively, to carry out the design of a civil engineering structure. The types of structures could include bridges, retaining structures and tunnelling set within the context of a larger project. Design work will include calculations and drawings in sufficient detail to allow a tend...

UUBS Referencing Guide on the Harvard System of Referencing1. All sources of information must be referenced correctly.  Students must ensure references are included in a bibliography at the end of your assignment and follow the UUBS Referencing Guide on the Harvard System of Referencing; poor citation of references will result in loss of marks.  This applies to all academic, practitioner and online company/product information so...

Flat Slab DesignA.Fig. Q-1 shows a flat slab supported on 450 mm by 450 mm columns arranged on a 6 m square grid. It is 200 mm thick and is provided with a drop panel, measuring 1.55 m by 1.55 m on plan, and 150 mm in depth.  The slab is to  carry a design ultimate load of 20 kN/m2 and is reinforced with H20 bars at a spacing of 150 mm at the top in each direction within a 1.6 m wide strip centered with the column. Given that: fck = ...

You are the engineer assigned to the design of this subdivision. Assuming your audience is the HCC engineers and planners, write a design report focusing on two main parts: 1. How you propose to approach the stormwater management of this subdivision using the ARC Low Impact Design Approach (TP 124, Chapters 3 & 4). This will be an overview of the proposed approach, no calculation or detailed design required.   Sub-tasks: &mid...

Range of options for managing flood riskAll around the world, choices have to be made on a number of levels if future flood risk is to be well managed and responsible flood managers are to work within the economic, political and institutional constraints of the day. Within those constraints, Governments must decide on the risk of flooding they are prepared to accept. In effect they can choose from a range of options: (a) Maintain current fl...

Negotiate and execute a realistic plan to deliver to agreed project outcomesThe Independent Engineering Project is a major element of accredited engineering or technical degree. It provides the necessary evidence that you are technically competent and capable of entering the world of work as a professional engineer or technologist. The aim is to develop your ability to work independently, in a chosen topic, using relevant technical research...

You are the engineer assigned to the design of this subdivision. Assuming your audience is the HCC engineers and planners, write a design report focusing on two main parts: 1. How you propose to approach the stormwater management of this subdivision using the ARC Low Impact Design Approach (TP 124, Chapters 3 & 4). This will be an overview of the proposed approach, no calculation or detailed design required.   Sub-tasks: &mi...