Well-Explained Civil Engineering Answers Worth Checking Out : Page - 10

Unit Learning OutcomesThis is a written report/assignment. You are to submit calculations, diagrams, sketches and other material related to your solution. Written responses must be clearly presented on A4 sheets. Your completed solution must be clearly indicated. Unit Learning Outcomes LO1 Explore deflection due to wind loadings, on fixed structures, and strategies to resist wind loading. LO2 Determine bending, shear and deflection for comp...

Task 1It is necessary to reopen a mine under the sea to extract potash. There is a flat area on the site near to the beach which was used in the past as a logistic center for the mine to bring in supplies and export the potash inland. This area is only about 4 m above mean sea level. The soil below this area is mainly soft sand with some made ground and some ridges of clay. A short distance inland from this area there are some steep rocky hill...

Module Learning Outcomes Assessed1. Demonstrate the basis of the engineering principles of reinforced concrete and structural steelwork design covered in the module. 2. Interpret design data in terms of the underlying engineering principles embodied in codes of practice. 3. Demonstrate an understanding of Health & Safety issues relating to designers responsibilities and an understanding of Construction Design Management issues. Notes:...

Thisassignment is desired to provide you knowledgeof the application, implementation and technicalities involved in off-site construction methods or systems used globally. The information you require for this assignment can be obtained online, direct access to project information, the Project Manager and anyother sources.Task 1: Case study backgroundYouare required to select a case study project (located anywhere around the world) whether residen...

Course Code   :  7BU505

Course Title   :  sustainable construction methods and materials

Ref style  :  Harvard

4/5 

Many criteria had to be met to build the visitor centerMany criteria had to be met at Attenborough Nature Reserve in order to build such a structure as the existing Visitor Centre. The building has been constructed on a flood plain, in a conservation area, on a Site of Special Scientific Interest, and within a nature reserve on green belt land. The principal funding for the project was initiated with a grant from the East Midlands Development...

Course Code   :  ENBU806

Course Title   :  off-site construction

Ref style  :  APA

4/5 

1: Case study background 1: Case study background You are required to select a case study project (located anywhere around the world) whether residential, commercial or industrial, where an off-site construction system has been used. The building project could involve nonvolumetric, volumetric or modular construction method. You are to report on the type of the building, size, location, client and key parties involved on the project (con...

The main content of the assignment, content page and reference pages, should be clearly stated  Question 1 A Developer plans to build and launch a new condominium project. As the Contract Manager, explain to your new staff what Quality Assurance (QA) and Quality Control (QC) are, for their preparatory work. Question 2 Describe how you would explain/discuss with your team at which stage of project QA and QC are most applicable. Quest...

Course Code   :  EEE3002 |#| electrical machines

Course Title   :  electrical machines

Ref style  :  Not Selected

4/5 

Horizontal AlignmentThis work is to be carried out individually. Each person will work with different data. Your calculations and answers will therefore be different from everyone else. Where the question shows a variable name, please take your value from the table below. Start your  answer to each question by stating your individual data, so that these can be checked. Answers using the wrong data will not be marked, and will score zero....

Course Code   :  KB7040

Course Title   :  sustainable development for engineering practitioners

Ref style  :  Harvard

4/5 

Module learning outcomesThis module will develop the theme of the role and responsibility of the engineer within society and enable the student to place sustainable development within the context of professional engineering practice. To support the successful professional practice, as defined by the Engineering Council, engineers need social literacy and an appreciation of the wider issues in sustainable development which are the focus of th...

Site visit and building descriptionThis assignment requires a detailed study of ANY building primary power distribution system and its secondary source to be provided in a building to meet the local code requirements. The choice of building can be either low-rise or high-rise buildings. The selected building can be residential, office, retails, service apartments or commercial buildings. The typical building single line diagrams (SLDs) Figure ...

Additional (Optional) MaterialsSchittich,C.,&Arima,K. (2012). A second look: Tadao Ando’s Church of Light in Ibaraki. Detail(English ed.),1, 5-11. http://search.ebscohost.com/login.aspx?direct=true&db=asu&AN=70641064&site=ehost-liveInstructions1.Read the Baek article. 1.Collect information from it and produce a brief case about The Church of Light that includes the following:a.Brief introduction about the buildingb.Architect...

Question: All drawings should be produced in an industry standard CAD/BIM application and presented on A3 sheets. Drawings should be bound into the report. You are encouraged to use images, graphics, charts, drawings and other material to support your work. Any material that is derived from other sources must be suitably referenced using a standard form of citation. Provide a bibliography using an academic standard referencing system. The re...

Contractual Risk Assessment1. Contractual risk assessment Select two construction contract forms. You can use either: i. Standard contract forms; orii. Bespoke contract forms; oriii. A combination of standard contract form and bespoke contract form. Perform contractual risk assessments on clauses that may relate to the effects of COVID-19 in construction projects. Compare the risk distributions between both the client and the cont...

Course Code   :  DMMG600

Course Title   :  site managment

Ref style  :  APA

4/5 

he portfolio will consist of a series of tasks that will be discussed in the class sessions. You maybe provided with additional information during the class to assist you compiling the tasks. Some time in class will be allotted to completing of the tasks. The following task need to be included in your portfolio:   Task 1 Organisation Charts   Management chart (organisation chart) specific to the project. This will include the sup...

Question: Successful completion of this assignment will demonstrate: • Understanding of the interaction between building fabric/form and solar irradiation, and building thermal performance and how local environmental conditions and the design of a building affect the thermal comfort of its occupants. • Ability to make practical application of calculation methods for energy flows and lighting in buildings, and hence characterise bui...