Engineering Practices in Australia for Electric Vehicles
Research on the development of electric vehicles that can become dream vehicles based on the Australian Context.
The topic researches on the development of electric vehicles that can become dream vehicles based on the Australian context. The textbook presented by James Trevelyan named “The making of an expert engineer“ has been considered here for managing this research and ensure finding out whether the electric vehicle can be a success in the future or not. From this research, I will be able to learn about the various engineering practices and with the advancement in technology nowadays, the electric cars to what extent can make a good place within the automobile industry (Brown, Campbell and Crook 2014).
What ? - As the topic revolves around the emergence of electric vehicles in Australia from the Australian context, it has been understood that change is evitable and it can bring major benefits to the organisation and the economy of the country too. From the Australian engineering practice, I have come up with new ideas of engineering related to the manufacturing and production of electric vehicles. It is quite relevant and appropriate for me because it has not only enhanced my technical skills but also has allowed me to gain knowledge about how can an electric vehicle be successful in the future (Di Giorgio, Liberati and Canale 2014).
So What ? I have also learnt that the electric vehicles are made by following innovative and effective engineering practices to make sure that the cars are powered by an electric motor rather than by using internal combustion engine. I have combined all the engineering work by managing proper designs of vehicles, calculations and used by technical skills to improve the efficiency of the electric motor so that it can be used in the vehicles to ensure functionality (Eastman 2012).
What else ? - From the Australian engineering practices, my skills and expertise further improved because I obtained important data and information regarding the use of power sources, cost analysis and the use of an electric motor as a replacement to internal combustion engine (Marino et al. 2013). The use of electric vehicles can lead to the reduction of pollution and maintain environmental sustainability in various places of Australia (Chen et al. 2014). Tesla, Nissan, Renault, Mitsubishi are few of the companies in Australia which have brought electric cars not only to reduce the level of pollution but also to bring out something new through sustainable practices to satisfy the needs and requirements of customers.
Manufacturing and Cost Analysis
What now ? - While being a part of the course, I managed to conduct detailed research on few engineering aspects which I had earlier studied. This has enhanced my thinking abilities and helped me to learn something new and innovative, which can allow me to progress in my career with ease as well as ensure that the production of electric vehicles can be successful in the future (García et al. 2013). I am currently working with team members on a project concerned with the development of electric motors for running the vehicles.
The electric vehicles will be the focus of all of us to create an electric motor that can fulfill the criteria of green engineering as well as achieve the goals and objectives of the project. The new things learned by me would help me to progress in my professional career and become a part of a major automobile company with ease as well. From the textbook, my industrial skills improved and this enabled me to understand that electric cars do not have any tail pipe emissions though the cost of travelling in this vehicle is considerably low. Though the consideration of cost is a major benefit, still electric vehicles take a lot of time to recharge, and the distance that may be covered by these vehicles are low when compared with the gasoline used vehicles (Laguador and Dotong 2014). I have promoted communication and considered the feedbacks and responses of each of the team members for enhancing the efficiency of decision making and manage the project efficiently. These are the values maintained by me to create good working conditions and improve the working conditions and atmosphere.
I have been working on the project of Australian engineering practices to develop an effective electric motor that can be used for running the vehicles. As it is an entirely new project, it is important to communicate the various information related to the engineering practices and make sure that proper communication is maintained all throughout the project management. The project on which I have been working on has enhanced my technical skills and even my ability to communicate with the other project team members (Shuai et al. 2014). From my perspective, I understood that sustainability is an important concept of the engineering, which can help in making the new vehicles run with less energy and resources. The resources would be used sustainability, which could further result in creating a less negative impact on the environment and improve the ability of future generations to fulfill their own needs and preferences with ease and effectiveness. By maintaining sustainability in engineering practices, it will be easy to reduce the wastes, management materials with ease, prevent pollution largely and enhance the efficiency of the product too (Brown, Campbell and Crook 2014).
Power Sources for Electric Vehicles
By undertaking the project, I have learned about the various sustainability policies and practices along with the broad range of benefits that have been drawn such as reduced costs of operations, decrease in the number of complaints from customers and increase the market value for the innovative cars in Australia (Chen et al. 2014). I have maintained values and ethics within the team to prevent any discrimination or conflicts and ensure that a good culture and working conditions are created. One of the major problem faced by me was the poor performance of a team member, which deteriorated the entire workforce efficiency. It is my responsibility to ensure that proper team management is done and communication is promoted for developing a team where all the team members have equal skills and knowledge to work on the project in coordination and as a team (Di Giorgio, Liberati and Canale 2014).
I will try my level best to communicate the findings and objectives that are needed to be achieved by the team. Communication should be done through email conversations, face to face meetings, etc. that can not only reduce chances of misunderstanding but will also lead to better maintenance of values and ethics while working n the project (Eastman 2012).
The report presents us with the idea of various engineering practices that are managed in Australia to develop new and innovative electric vehicles. From the report, I have obtained knowledge and information about the various engineering practices, and these are essential for developing an electric motor that can run the vehicles with the utilisation of less energy and resources. The discussion portion showed the various aspects of Australian engineering practices and how these had been applied for the development of electric cars. Though the introduction of electric cars was considered as a major revolution, still regarding competence and reliability, the electric vehicles lacked certain benefits that could be gained by the internal combustion engine vehicles. Thus based on the cost effectiveness, reliability and power sources, it could be understood that the electric vehicles might be used as an alternative to fuel combusted engines after a long time in the future, but presently, it does not adjust to the requirements of people in the present days.
Brown, D.A., Campbell, K.S.W. and Crook, K.A., 2014. The Geological Evolution of Australia & New Zealand: Pergamon International Library of Science, Technology, Engineering and Social Studies. Elsevier.
Chen, X., Shen, W., Cao, Z. and Kapoor, A., 2014. A novel approach for state of charge estimation based on adaptive switching gain sliding mode observer in electric vehicles. Journal of Power Sources, 246, pp.667-678.
Di Giorgio, A., Liberati, F. and Canale, S., 2014. Electric vehicles charging control in a smart grid: A model predictive control approach. Control Engineering Practice, 22, pp.147-162.
Eastman, C.M. ed., 2012. Design for X: concurrent engineering imperatives. Springer Science & Business Media.
García, P., Torreglosa, J.P., Fernández, L.M. and Jurado, F., 2013. Control strategies for high-power electric vehicles powered by hydrogen fuel cell, battery and supercapacitor. Expert Systems with Applications, 40(12), pp.4791-4804.
Laguador, J.M. and Dotong, C.I., 2014. Knowledge versus Practice on the Outcomes-Based Education Implementation of the Engineering Faculty Members in LPU. International Journal of Academic Research in Progressive Education and Development, 3(1), pp.63-74.
Marino, R., Scalzi, S., Tomei, P. and Verrelli, C.M., 2013. Fault-tolerant cruise control of electric vehicles with induction motors. Control Engineering Practice, 21(6), pp.860-869.
Shuai, Z., Zhang, H., Wang, J., Li, J. and Ouyang, M., 2014. Lateral motion control for four-wheel-independent-drive electric vehicles using optimal torque allocation and dynamic message priority scheduling. Control Engineering Practice, 24, pp.55-66.
To export a reference to this article please select a referencing stye below:
My Assignment Help. (2018). Development Of Electric Vehicles In Australia: An Engineering Perspective. Retrieved from https://myassignmenthelp.com/free-samples/engineering-practices.
"Development Of Electric Vehicles In Australia: An Engineering Perspective." My Assignment Help, 2018, https://myassignmenthelp.com/free-samples/engineering-practices.
My Assignment Help (2018) Development Of Electric Vehicles In Australia: An Engineering Perspective [Online]. Available from: https://myassignmenthelp.com/free-samples/engineering-practices
[Accessed 22 February 2024].
My Assignment Help. 'Development Of Electric Vehicles In Australia: An Engineering Perspective' (My Assignment Help, 2018) <https://myassignmenthelp.com/free-samples/engineering-practices> accessed 22 February 2024.
My Assignment Help. Development Of Electric Vehicles In Australia: An Engineering Perspective [Internet]. My Assignment Help. 2018 [cited 22 February 2024]. Available from: https://myassignmenthelp.com/free-samples/engineering-practices.